Publicité
Les langues disponibles
Les langues disponibles
Brake Fluid Reservoir and Level Indicator
Brake master cylinder reservoir level can be viewed under the front access cover. Check the brake master
cylinder fluid level before each use of the vehicle. If the fluid level is lower than the "low" mark, determine the
cause or refill with brake fluid as necessary.
NOTE:
When checking the fluid levels, the vehicle must be on level ground. If the fluid level is lower than the "lower"
mark, add DOT4 brake fluid. Do not overfill.
An over-full master cylinder may cause brake drag or brake lockup, which could result in an accident
causing serious injury or death. Maintain brake fluid at the recommended level. Do not overfill.
Never store or use a partial bottle of brake fluid. Brake fluid is hygroscopic, meaning it rapidly
absorbs moisture from the air. The moisture causes the drop of boiling temperature of the brake
fluid, which can lead to early brake fade and the possibility of accident or severe injury. After
opening a bottle of brake fluid, always discard any unused portion.
CONTROLS AND FEATURES
WARNING
WARNING
70
Publicité
