Télécharger Imprimer la page

CF MOTO UFORCE 1000 Guide De L'utilisateur page 170

Publicité

Les langues disponibles

Les langues disponibles

Stabilize the Fuel
Fill the fuel tank with fresh fuel that has been treated with fuel stabilizer according to the product label
directions. Do not allow untreated fuel to remain in the tank longer than 30 days, as the fuel begins to
degrade and can cause damage to the fuel system components.
Battery Storage
Remove the battery from the vehicle and ensure that it is fully charged before placing it in storage.
Protect the battery from freezing temperatures, which can damage the battery.
Lubricate
Inspect all cables and lubricate with cable lubricant according to the product label directions. Grease the
vehicle lubricating points with all season grease.
'Fog' the Engine
Tilt the cargo box to access the spark plug(s).
Remove the spark plug(s), rotate the piston to the bottom of its stroke, and pour approximately 2.0 oz.
(15mL~20mL) of engine oil into the opening.
NOTE:
Do this carefully! If you miss the spark plug hole, oil will drain from the spark plug cavity, and appear to be an
oil leak. To access the spark plug hole, use a section of clean hose and a small plastic squeeze bottle filled
with the pre-measured amount of oil.
Reinstall the spark plug(s). Torque the spark plug to specification.
Turn engine over several times slowly. Oil will be forced in and around the piston, piston rings and the
cylinder will be coated with a protective film of fresh oil.
CLEANING AND STORAGE
166

Publicité

loading

Ce manuel est également adapté pour:

Uforce 1000 xl