Publicité
Les langues disponibles
Les langues disponibles
Cooling System
Coolant Level Inspection
1� Place the vehicle on a level surface.
2� Inspect the coolant level in the reservoir�
3� If the coolant is at or below the lower limit mark; remove the
access cover and the reservoir cap � Add coolant to the upper
limit mark, install the reservoir cap, and then reinstall the
access cover�
NOTE:
Check the coolant level in the coolant reservoir when the engine is
cold, as the coolant level will vary with engine temperature.
If water is added, have your dealer check the antifreeze content of the coolant as soon as possible.
Never add hard water or salt water, as it is harmful to the engine. Softened tap water may be used
if distilled water is not available. The radiator fan operation is automatically switched on or off
according to the coolant temperature in the radiator during operation.
MAINTENANCE
CAUTION
145
1 UPPER
2 LOWER
1
2
Publicité
