Télécharger Imprimer la page

CF MOTO UFORCE 1000 Guide De L'utilisateur page 55

Publicité

Les langues disponibles

Les langues disponibles

Electronic Throttle Pedal - (  3   )
The Electronic throttle pedal is located to the right of the brake
pedal� The throttle pedal controls engine rpm and vehicle speed�
To control vehicle speed, press on the throttle pedal with your right
foot. Always check the pedal function before driving.
The electronic throttle and electronic throttle body has the following
functions:
1� Starting protection function: The vehicle can start directly on
N and P gear, and should apply foot brake at the same time
while it is on the L or H gear.
2� Reverse override function: The vehicle speed is limited to
25km/h while it is in reverse gear.
3� 4WD-LOCK function: Turn the switch to 4WD-LOCK mode, the vehicle speed is limited to 35km/h.
Depress the override button can remove the speed limitation.
4� Idling function: When the vehicle is in N gear, engine RPM is limited to 5000rpm.
5� Brake priority function: When the driver applies both brake pedal and throttle pedal at the same time,
the electronic throttle valve will shut off the engine and go back to idle automatically.
6� Limp home function: When a fault of the electronic throttle body or electronic throttle pedal is detected,
the system will enter into torque limitation or limp home mode. When faults from electronic throttle
body, the engine will enter into torque limitation and RPM turns back to be idling state. When faults
from electronic throttle pedal, the vehicle will enter into limp home mode, the top RPM will be less than
5000rpm�
CONTROLS AND FEATURES
51
3

Publicité

loading

Ce manuel est également adapté pour:

Uforce 1000 xl