Mode Switch - 13
When the switch is on this position, the vehicle is in 'NORMAL'
mode� The dashboard display will also shift to 'NORMAL'
mode� The vehicle will have a less aggressive throttle
NORMAL
response for smooth starts and is intended for flat trails, hard
pack ground, etc. Use for light-duty riding. NOTE: Do not use
this mode for driving situations that place high load on
the CVT belt. Damage may occur.
When the switch is on this position, the vehicle is in 'WORK'
mode. The dashboard display will also shift to 'WORK' mode.
The vehicle will have a faster throttle response.
WORK
NOTE: Use this mode for work loads, complex terrain or
trails, and other driving situations that can place a high
load on the CVT belt.
Hand Brake - 14
This vehicle is equipped with an auxiliary hand brake, which is located
to the left of the steering wheel. Pull back on the lever to apply the rear
brakes and prevent the vehicle from rolling when parked on an incline.
To release the hand brake, pull up slightly and press the release button at
the end of the lever, then push the lever down to its original position.
Never depend on the transmission parking feature alone if
the vehicle is parked on a hill. Always apply the hand brake
and block the wheels on the downhill side of the vehicle to
prevent movement. It is recommended to park the vehicle on
level ground.
CONTROLS AND FEATURES
CAUTION
58
13
14