Operation; Starting Up; Resetting The Reset Button - Truma MonoControl Mode D'emploi

MonoControl
4

Operation

4.1

Starting up

Open the gas remote switch if present�

Connect the gas cylinder and ensure that the hose connection is

in perfect condition�
Open the cylinder valve�

Firmly press the hose rupture protection on the high-pressure

hose for 5 seconds if necessary�
Reset the reset button if necessary�

The system is now ready for operation� The gas appliances can be
used�
4.2

Resetting the reset button

Fig� 6
To reset the gas pressure regulator, press the black reset button

with the T20 Torx pin of the screw aid in the housing and gently
turn in an anti-clockwise direction�
Ensure that the black reset button remains engaged� Repeat the

procedure if necessary�
50020-00982 ∙ 00 ∙ 08/2022
Operation
EN 43