Pfeiffer Vacuum CENTERONE Instructions D'installation page 3

Guide rail
Fig. 1: Guide rail on the rack module adapter
 It is advisable to fit a guide rail to the rack module adapter to ease the pressure on the
front panel of the device.
Mounting height of the rack module adapter
 Ascertain the mounting height of the device on the basis of the following diagram.
?
1
Fig. 2: Mounting height (1 or 2)
Rack mounting at mounting height 1 (only applies to CenterOne)
Thermal overload!
 When setting up the device, ensure that the maximum permissible ambient temper-
ature (due to installation or solar radiation, for instance) is not exceeded.
 Ensure that there is good air circulation!
 Secure the rack module adapter in place in the switchgear cabinet
 Slide the device into the rack module adapter.
 Secure the device in place using the screws supplied.
2
NOTICE
Installation
3