Pfeiffer Vacuum CENTERONE Instructions D'installation page 13

Ethernet
8-pin RJ45
8 1
USB Type A
The Ethernet port supports direct communication with the CenterOne/CenterTwo/Cen-
terThree via a computer.
● Green LED: Link or transmit LED.
– Indicates that a hardware-based connection exists.
● Yellow LED: Status or packet-detect LED.
– Indicates the status of the transmission. Whenever this LED flashes or flickers, this
indicates that data is being transmitted.
Pin Assignment
1 TD+ (transmitted data +)
2 TD- (transmitted data -)
3 RD+ (received data +)
4 NC
5 NC
6 RD- (received data -)
7 NC
8 NC
 Connect the Ethernet cable to the port on the back of the device.
Ethernet
Installation
13