Active Alarms - CAME PXC08 Manuel

Notification of the failure is not sent immediately, but only after a time period set by the Installer, so as to avoid pointless notifica-
tions in the event of power surges or temporary power outages .
In case of
failures
Telephone calls
To security services
m
Opening the control unit or its components triggers an alarm signal.
m
Maintenance on the system must be carried out only by qualified staff. Danger of electrocution due to live parts inside the control
unit.
EVENTS
Each system event is recorded in the control unit's database .
The memory contains a limited number of events (see control unit features), each new event deletes the oldest one stored . The events
memory is retained even when the control unit has no power .
All the events in the memory can be viewed via the keypad display .
Each event is given with the date and time . The types of event are given below:
• Alarms
• Failures
• Armings
• Disarmings

ACTIVE ALARMS

08:23 16/05/10 123456
ENTER CODE
*
WAITING
*=USER MENU
EVENTS 02
EVENTS MENU
*
ACTIVE ALARMS
* HH:MM DD/MM/YY
DESCR.1 EVENT
#
EVENT NO. XXX
*
DESCR.2 EVENT
Alarm signal on key-
pads
▼ ▲
▼ ▲
▼ ▲
*
Telephone calls
Voice and SMS
08:24 08:24 08:24 08:24 19/03/13 19/03/13 19/03/13 19/03/13
#####UUUPX--- #####UUUPX--- #####UUUPX--- #####UUUPX---
Flashing
LED constantly on there is a fault
• Code use
• Key use
Active alarms means recent alarms for which the alarm memory
has not yet been restored .
1 . Access the User menu by pressing the control unit's
# key for 5 secs, followed by the User code .
*
2 . Press key to confirm
EVENTS
3 . With select
ACTIVE ALARMS
4 . With select
5 . For each event the following is displayed:
• TIME and DATE
• EVENT DESCRIPTION (part 1)
• EVENT INDEX NUMBER (accessible with key
• EVENT DESCRIPTION (part 2)
6 . To end the display press
LED battery failure or missing
*
and press .
*
and press .
*
)
#
.
/ESC