Partialising Areas; Partialising Areas By Scenario - CAME PXC08 Manuel

08:23 16/05/10 123456
ENTER CODE
WAITING
*=USER MENU
D
08:24 16/05/10
----

PARTIALISING AREAS

The partialising of areas during arming can be done either when scenarios are launched or from the User Menu . The purpose of this is to be
able to arm or disarm the areas concerned completely freely without impacting on the status of other areas .

PARTIALISING AREAS BY SCENARIO

08:23 16/05/10 123456
ENTER CODE
WAITING
A B C
*=USER MENU
GOING OUT
A=START ▼▲=SCEN..
GOING OUT
####
AREA OFF
PERIMETER
GOING OUT
#-##
GOING OUT
U-UU
08:24 16/05/10
#-##
▼ ▲
0
2
A
To disarm the system:
1 . Access the User menu by pressing the control unit's
# key for 5 secs, followed by the User code .
*
2 . Press key to confirm .
D
3 . Press to start disarming .
4 . If the User Code is enabled for disarming, the common areas
associated with the code and keypad will be disarmed .
When disarming is completed, the keypad/control unit can have two
different settings:
----
• All areas off: , LED
---#
• Some areas on:
To partialise the areas armed by a scenario:
1 . Access the User menu by pressing the control unit's
# key for 5 secs, followed by the User code .
*
2 . Press key to confirm (necessary if keys
enabled for quick arming without code) .
3 . Select the scenario to launch by pressing one of the keys
, ,
A B C
.
4 . If the scenario is not one of the first three, press
the one you want with the
0
5 . Press key to display the areas of the scenario .
6 . The areas on or that will be on are displayed with
1
7 . By pressing keys from
remove (areas to disarm) the configuration of areas that you
want to set by launching the scenario .
8 . A message will briefly show the clear description of the area .
A
9 . Press key to launch the selected scenario .
10 . During the exit time the keypad will emit a continuous sound .
The areas being armed are marked with the letter
11 . To force arming of the areas by cancelling the exit time press
A
again .
12 . When arming is completed the noise from the keypad will stop
and the areas on will be marked with the symbol
At the end of the exit time the keypad can have two different set-
tings:
####
• All areas on: , LED
#-##
• Some areas on:
off .
, LED on and flashing .
, ,
A B C
are not
A
and select
keys .
#
.
4
to you can add (areas to arm) or
U
.
#
.
constantly on .
, LED on and flashing .
/ESC
/ESC