08:23
16/05/10
123456
ENTER CODE
WAITING
A B C
*=USER MENU
GOING OUT
KITCHEN WINDOW
INPUT XXX OPN.
A
*
*=EXCLUDE #=EXIT
INPUT XXX EX.
*=INCLUDE #=ESC
GOING OUT
FRONT DOOR
GOING OUT
XUUU
EXCLUDE INP.?
*=ALL
*
08:24 16/05/10
P####
All temporarily excluded inputs will be re-included when the associated areas are disarmed .
DISARMING
Disarming can be carried out, with previous authorisation of the code, either via key D or by scenario (if set up) .
m
If the code keyed in is not enabled for disarming, or does not manage some areas of the keypad, these will not be disarmed .
▼ ▲
▼ ▲
*
#
A
A
To launch an arming scenario with open inputs:
1 .
Access the User menu by pressing the control unit's
# key for 5 secs, followed by the User code .
*
2 .
Press key
to confirm (necessary if keys
enabled for quick arming without code) .
3 .
Select the scenario to launch by pressing one of the keys
,
,
A
B
C
.
4 .
If the scenario is not one of the first three, press
the one you want with the
5 .
If the scenario to be launched shows open inputs, the list of
open inputs is shown on the second row of the display (e .g .
KITCHEN WINDOW
) and they will be displayed in rotation .
6 .
To temporarily exclude an input:
*
a . Press
when the open input is displayed . If to the right
of the first row you see
OK
is open;
that the input is closed and
the input is excluded .
b . The open input can be excluded or re-included with
c . The status of the other inputs can be viewed with
#
d . Press
to return to the scenario .
A
7 .
Press key
to launch the selected scenario . The exit time is
started, the areas in this state will be marked with a letter
and the keypad will emit a continuous sound . To force arming
of the areas by cancelling the exit time press
8 .
If there were other open inputs (e .g . front door) the areas they
belong to will be marked with the letter
emit an intermittent sound . If the areas in question have been
programmed in force-start mode, at the end of the exit time
the system will sound the alarm . Otherwise these areas will
never arm .
9 .
To exclude the areas that are still open press
EXCLUDE INPUTS?
temporarily excluded with
(m always check open inputs before pressing
10 . When arming is completed, the keypad will stop making a
noise and the areas on will be marked with the symbol
the one with the excluded input will be marked with
At the end of the exit time the keypad can have two different set-
tings:
#P##
•
All areas on:
, LED
#P##
•
Some areas on:
,
,
A
B
C
are not
A
and select
keys .
OPN.
it means that the input
EXC.
A
again .
X
and the keypad will
A
. The message
is displayed . All the open inputs are
*
*
) .
#
, while
P
.
on and flashing .
, LED
on and flashing .
/ESC
that
*
.
.
U