Scenarios; User Codes - CAME PXC08 Manuel

Scenarios

Managing systems through scenarios has the benefit of simplifying the arming of areas for the User, in this way management is safe and
fast .
Scenarios are programmed by the Installer and make it possible to:
• set whether the system is armed or not .
• activate or deactivate outputs .
It is the Installer's responsibility to teach the User about the functions and use of scenarios .
For the use of scenarios refer to the system management sections for the device being used (keypads, readers, etc .) .
08:24 08:24 08:24 08:24 19/03/13 19/03/13 19/03/13 19/03/13
#####UUUPX--- #####UUUPX---
#####UUUPX--- #####UUUPX---

User Codes

The code (aka User Code) is your OWN access key for managing the system from a keypad or the control unit .
To access the User menu enter the default code
Depending on the User code properties, Users will be able to:
• Launch scenarios to arm / disarm areas from: keypads, readers, by phone or web interface .
• Access the user menu from a display keypad or the control unit .
USER CODE MANAGEMENT
Through the menu
• Change the code .
• Display its properties .
• Change the code description
m
Do not use simple codes or ones that are easy to guess (birthday, etc .); all the control units are manufactured with the default code
123456
, make sure that this is changed (to check just enter the code on the keypad, if
code is disabled) .
Passwords with all the digits the same are not accepted . For example 111111, 333333, etc .
It is the Installer's responsibility to teach the User about the properties and management of the user code .
GOING OUT
123456
or use the proximity key, having already configured it with the control unit .
you can:
WRONG CODE
appears it means that the