User Code Management (Personal Code) - Change Code; Code Properties - CAME PXC08 Manuel

USER CODE MANAGEMENT (PERSONAL CODE) - CHANGE CODE

08:23 16/05/10
123456
ENTER CODE
WAITING
222222
*=USER MENU
USER CODE 05
▼ ▲
MANAGEMENT
* USER CODE XXX
CHANGE CODE
* NEW CODE
*****
*
CONFIRM CODE
*****
*
CODE
ACCEPTED

CODE PROPERTIES

08:23 16/05/10
123456
ENTER CODE
*
WAITING
*=USER MENU
USER CODE 05
▼ ▲
MANAGEMENT
* USER CODE XXX
PROPERTIES
* ASSOC. AREAS XXX
####
▼ ▲
AUTHORIZAT. XXX
ARMING + DISARM.
▼ ▲
REMOTE CTRL. XXX
ENABLED
To change the user code:
1 . Access the User menu by pressing the control unit's
secs, followed by the User code .
2 . Press key
3 . With
4 . With
your own user code) and press
▼ ▲
5 . Enter the new code and confirm with
6 . Re-enter the new code and confirm with
7 . If the code has been accepted you will see
8 . Press
er if they need to be changed .
To display the properties of the user code:
1 . Access the User menu by pressing the control unit's
secs, followed by the User code .
2 . Press key
3 . With
▼ ▲
4 . With
own user code) and press
5 . With keys
ASSOC. AREAS
a .
Depending on the programming assigned to the code the User with this
code will be able to manage the assigned areas .
and
b .
areas:
c .
control (i .e . telephone) the security alarm control unit .
6 . Press
*
to confirm .
USER CODE MANAGEMENT
select
CHANGE CODE
select
*
.
#
to exit and return to the previous menus .
The properties of the User Code cannot be changed . Contact the Install-
*
to confirm .
USER CODE MANAGEMENT
select
PROPERTIES
select (
*
.
scroll through the code properties .
Shows the areas of the system managed by the User .
–
means an unmanaged area .
AUTHORIZAT.
Shows the properties of the code on the associated
ARMING + DISARM.
i . Means that the User can both arm and dis-
arm any associated areas .
ARMING ONLY
ii . Means that the User can only arm any asso-
ciated areas and not disarm them .
REMOTE CTRL.
Shows whether the code is activated to remotely
#
to quit and return to the previous menus .
/ESC # key for 5
*
and press .
XXX
( shows the index number of
*
(codes 4, 5 or 6 digits long are valid) .
*
.
CODE ACCEPTED
.
/ESC # key for 5
*
and press .
XXX
shows the index number of your
#
Means a managed area,