Installation; Assembly Of Motor To Mount - MINN KOTA Riptide Fortrex Manuel De L'utilisateur

MOUNTING CONSIDERATIONS
It is recommended that the motor be mounted as close to the keel or centerline of the boat
as possible. Make sure the area under the mounting location is clear to drill holes and install
nuts and washers. Make sure the motor rest is positioned far enough beyond the edge of the
boat. The motor must not encounter any obstructions as it is lowered into the water or raised
into the boat when stowed and deployed. Consider a quick release or adapter bracket with
the installation of your motor. To view a list of accessories, please visit minnkotamotors.com.
TOOLS AND RESOURCES REQUIRED
• #2 Phillips Screwdriver
• (2) #3 Phillips Screwdriver
• 1/4" Allen Wrench
• Drill

INSTALLATION

Assembly of Motor to Mount

1
a. Place the Mount on an elevated, level surface such
as a workbench or the tailgate of a pickup.
b. Remove the 5/16" Allen Screw and Lock Washer
from the Mount using an Allen wrench.
NOTICE:
This motor weighs approximately 55 lbs.
We recommend having a second person help with
the installation.
8 | minnkotamotors.com
INSTALLATION
• 9/32" Drill Bit
• 7/16" Box End Wrench
• A person to help with
installation
• Torque Wrench
• File or Sandpaper
• Hack Saw
• Marker or Pencil
Allen Screw
Lock Washer
Mount
Safety
Latch
View accessories
available for your
trolling motor at
minnkotamotors.com.
• 1/8" Flat Screwdriver
• 1/8" Allen Wrench
• Loctite
• Tape Measure or Ruler
End Links
©2018 Johnson Outdoors Marine Electronics, Inc.