Stowing And Deploying The Motor - MINN KOTA Riptide Fortrex Manuel De L'utilisateur

Masquer les pouces Voir aussi pour Riptide Fortrex:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

USING & ADJUSTING THE MOTOR

STOWING AND DEPLOYING THE MOTOR

When stowing or deploying the motor, keep fingers clear of all hinge and pivot points and all moving parts. Practice proper ergonomics
when stowing and deploying the motor to prevent injury.
Moving the motor creates a variety of pinch points. The Control Head will create a pinch point if the Depth Adjustment Knob is
loosened and the Control Head slides to the top of the Mount. Grasp the Shaft and prevent it from sliding all the way down to prevent
the pinch point. Grasp the motor away from the area that may come in contact with another area of the motor to prevent injury.
When the motor is being transported, on water or land, it is important to place the motor completely out of water. The motor should
be positioned up close to the Mount. Always secure the Depth Adjustment Knob and slide the collar down to the top of the Mount for
added security during transport and then secure the Hold Down Strap. This provides a secure stow and holds the motor in place during
transportation when it is subject to high levels of shock and vibration. Failure to secure the motor may result in injury or damage to the
unit.
1
a.
To Deploy the Motor, simply pull back and lift the
motor off of the mount with the Pull Grip and Rope.
Lower the motor into the water using the Pull Grip
and Rope. The motor will lock into the deployed
position automatically.
b.
To Stow the Motor, pull back and lift the motor out
of the water with the Pull Grip and Rope. Lower the
motor Lower Unit onto the Motor Rest using the Pull
Grip and Rope. The motor will lock into the stowed
position automatically. Wrap the Hold Down Strap
over top of the Motor Shaft to secure the motor.
WARNING
Avoid contact with the Bowguard while stowing, deploying or
operating. The Shaft and mechanisims within the Bowguard
can create pinch points. Avoid contact to avoid injury. Always
use the Pull Grip and Cable to stow and deploy the motor to
prevent injury.
20 | minnkotamotors.com
WARNING
WARNING
WARNING
Motor Shaft
Lower Unit
Pull Grip
and Rope
Motor Rest
Hold Down Strap
©2018 Johnson Outdoors Marine Electronics, Inc.

Publicité

Chapitres

Table des Matières
loading

Table des Matières