Cleaning And Maintenance - Sime RMG Mk.II Serie Manuel D'installation

LOCK OUT RESET OF
THE CONTROL BOX
If the burner does not ignite, the red led on
the reset button will turn on. Press the but-
ton to restart the boiler automatically (fig.
18). Should the boiler "lock out" again, you
must call the authorized technical staff.
TURNING OFF BOILER
To turn off the "RMG" boiler completely, cut
off electricity supply to the equipment by
operating the main switch (fig. 14).
If the boiler is not going to be used for a
lengthy period it is advised to turn off the
electricity supply, close the gas cock, and if
low temperatures are foreseen, empty the
boiler and the hydraulic system to avoid
breakage in the tubes due to the freezing of
the water.
GAS CONVERSION
Should it be necessary to conver t the
appliance to a different gas from the one
for which the boiler has been equipped,
approach the technical staff.

CLEANING AND MAINTENANCE

At the end of each heating season, it is
essential to have the boiler thoroughly
checked and cleaned out.
RESET
BUTTON
RED LED LIT
Preventive maintenance and checking of
the efficient operation of the equipment
and safety devices must be carried out
exclusively by the authorized technical
6
°C
40 80
20 100
0 120
6
40 °C 80
20 100
0 120
staff. The boiler is supplied with an elec-
tric cable. Should this require replace-
ment, contact exclusively with the autho-
rized technical staff.
IT
ES
PT
GB
FR
BE
GR
RO
Fig. 17
RUS
Fig. 18
57