3M DX70 Guide D'utilisation page 13

To reduce the risk associated with a ruptured lamp:
• Always handle the fragile lamp module with care.
• Remove the projector from the ceiling or wall mount before replacing the
lamp.
• Use care when replacing the lamp module in the event of a lamp rupture—
small glass particles and small amounts of mercury may be present.
• Ventilate the area where the lamp rupture occurred.
• Wear safety goggles and gloves when cleaning up ruptured lamp debris.
• Carefully collect the ruptured lamp debris in a closed container and
dispose of the container and the expired lamp module in accordance with
federal, state, and local regulations.
• Wash your hands thoroughly after handling ruptured lamp debris.
• Replace the lamp module when the lamp replacement message appears.
• Never replace the lamp module with a previously used lamp module.
© 2007 3M 3M
WARNING
™
Digital Projector DX70 Product Safety Guide
Replacing the Lamp Cartridge
13