General Information; Intended Use; Safety Instructions; Cleaning - Soehnle Professional Standard Mode D'emploi

1. GENERAL INFORMATION

1.1 Intended use

Soehnle Professional standard compact scales are designed for weighing, taring, zero setting,
plus/minus weighing, component adding, counting with PLU memory, control, piece quantity
checking, neutral measurement, percentage weighing, and price calculation.

1.2 Safety instructions

Please read through the information in this user manual carefully before using the equipment for
the first time. It contains important information concerning the installation, correct use and
maintenance of the equipment.
The manufacturer will not be liable if the user does not observe the following instructions:
When using electrical components with higher safety requirements, you must follow the
appropriate regulations. Never carry out servicing work on the equipment while it is carrying live
voltage. Improper installation will invalidate the warranty.
The electrical connection conditions must be consistent with the rating values printed on the power
supply unit.
The equipment is designed for use indoors. Take note of the permitted ambient temperatures for
operation (see Technical Data). This equipment meets the requirements for electromagnetic
compatibility. Do not exceed the maximum values specified in the standards.
If you have any problems, please contact your Soehnle Professional service partner.

1.3 Cleaning

The equipment can be cleaned simply with a damp cloth and a commercially available cleaning
product.
Do not use abrasive cleaning agents.
www.soehnle-professional.com
27