Soehnle Professional Standard Mode D'emploi page 36

2.4 Switching to the second unit of weight
Switching between different units of weight must be enabled in Calibration Mode
(ECAL 1 Position 05 Value = 0)!
Switching between kg and lb is available in the non-approved version only!
To program the Function key, "Second unit of weight" must be selected in Setting
mode! For Function key settings, see Paragraph 1.13 or User mode 3710 (see
separate description 470.702.099)
Switching to second unit of weight (e.g. from kg to lb) in UCAL 1 Position 04 Value
= 2:
Press and hold the Print button then press the On/Off button for 5 seconds until
UCAL1 appears.
Then press the Print button to store.
Use the Tare button to move to position 04 and press the Print button to store.
Use the Tare button to set weighing range 2 then press Print again to store.
Position 05 appears on the display.
Press the Zero button, UCAL1 appears on the display.
To save the setting and exit, press and hold the Print button then briefly press the
Zero button. The display returns to weighing mode.
Switching between units:
Press the Function key to switch to the other unit.
www.soehnle-professional.com
UCAL 4 Position 02 = Value 2.
36