Hold Function; Traffic Light Signal Connection - Soehnle Professional Standard Mode D'emploi

Scroll up or down using the arrow keys (Tare / Function key).
Use the Print button to exit this display mode.
Press the Zero button, UCAL5 appears on the display.
To save the setting and exit, press and hold the Print button then briefly press the
Zero button. The display returns to weighing mode.

2.8 Hold function

The Hold function is activated with the Function key in Setting mode. For Function
key settings, see Paragraph 1.13 or User mode 3710 (see separate description
470.702.099)
In weighing mode, the Hold function is activated by pressing the Function key.
The following Hold functions can be used to freeze the weight data and are
provided as standard in the Standard Compact range of scales. Default is "0".
The Hold function is set in Setting mode (see separate description 470.702.099
User mode 3710)
Hold mode
0
1
2
3
4
5
6
Press the function key again to deactivate Hold mode.

2.9 Traffic light signal connection

The Standard terminal has 4 outputs that can be individually configured in Setting
mode (see separate description 470.702.099 User mode 3710). These outputs are
configured by default for an external traffic light display.
www.soehnle-professional.com
UCAL 4 Position 02 = Value 1.
UCAL 1 Position 02.
Function
Not active
Hold when stable
Hold when stable
Max. value
Max. value
Drag pointer
Drag pointer
To cancel
On/Off button
Unload the scales
On/Off button
Unload the scales
On/Off button
Unload the scales
39