General Information; Intended Use; Safety Instructions; Cleaning - Soehnle Professional 9055 Mode D'emploi

1. GENERAL INFORMATION

1. GENERAL INFORMATION 1. GENERAL INFORMATION 1. GENERAL INFORMATION

1.1 Intended use

1.1 Intended use 1.1 Intended use 1.1 Intended use
Soehnle Professional bench scales are designed for weighing, component adding and taring for
non-approvable applications.

1.2 Safety instructions

1.2 Safety instructions 1.2 Safety instructions 1.2 Safety instructions
Please read through the information in this user manual carefully before starting up. It contains
important information concerning the installation, correct use and maintenance of the equipment.
The manufacturer will not be liable if the user does not observe the following instructions: The manufacturer will not be liable if the user does not observe the following instructions: The manufacturer will not be liable if the user does not observe the following instructions: The manufacturer will not be liable if the user does not observe the following instructions:
When using electrical components with higher safety requirements, you must follow the
appropriate regulations. Never carry out work on the equipment while it carries live voltage.
Improper installation will invalidate the warranty.
The electrical connection conditions must be consistent with the rating values printed on the power
supply unit.
The equipment is designed for use indoors. Pay attention to the permitted ambient temperatures
for operation (see Technical Data). This equipment meets the requirements for electromagnetic
compatibility. Do not exceed the maximum values specified in the standards.
If you have any problems, please contact your Soehnle Professional service partner.

1.3 Cleaning

1.3 Cleaning 1.3 Cleaning 1.3 Cleaning
The equipment can be cleaned simply with a damp cloth and a commercially available cleaning
product.
Do not use abrasive cleaning agents.
www.soehnle-professional.com 12