2.5 Tare function
Manual taring
Place an empty container on the platform and press the Tare button.
Manual tare input
To program the Function key, "Manual Tare Input" must be selected in Setting
mode. To set the Function key, see User Mode 3710 (see separate description
470.702.099).
UCAL 4 Position 02 = Value 4.
Set the value using the Tare button or Function key. Press briefly to increase the
value by one. Press and hold to scroll rapidly through the values (up or down).
The selected value is stored by pressing the Print button.
Cancel taring
Press the Zero button to cancel taring.
Tare info
Press the Zero button to display the tare information.
If you press the button briefly, the tare weight is deleted, if you press and hold
until the weight indication flashes, the tare weight is not deleted.
Auto-tare function
This automatically tares the first weight value placed on the scales.
Place an empty container on the platform. Once the scales are stabilised, the first
weight value is stored in the tare memory.
After unloading, the tare memory is automatically deleted.
The Auto-tare function must be selected in Setting mode (see separate description
470.702.099 User mode 3710)
Temporary tare function
The temporary tare function can be assigned to the Function key.
For Function key settings, see Paragraph 1.13 or User mode 3710 (see separate
description 470.702.099)
Unknown tare values are added to the existing tare value without changing the net
weight display.
When the Function key is pressed, the word "hold" appears on the display.
Place an additional tare weight or remove the present tare weight from the
platform.
Press the Print button to store the new tare weight.
www.soehnle-professional.com
UCAL 1 Position 03 = Value 1.
UCAL 4 Position 02 = Value 5.
37