Control - Soehnle Professional Standard Mode D'emploi

3.4 Control

The control switching points are set in Setting mode.
UCAL 2
UCAL 2
UCAL 2
Setting:
Press and hold the Print button and then press the On/Off button for 5 seconds
until UCAL1 appears.
With the Tare button, raise this value to UCAL2 then press the Print button to store.
Position 01 in UCAL2 is displayed
Then, press the Print button to open the input field for the reference weight value.
Using the Tare button and Function key, set a number value in the flashing space.
You can use the Zero button to move by one decade from right to left.
After setting the reference value, store with the Print button, position 02 in UCAL2
is displayed.
Then, press the Print button to open the input field for the weight positive
tolerance.
Use the T, F and Zero buttons to set a number value for the positive tolerance, as
for the reference weight.
After setting the weight positive tolerance, store with the Print button, position 03
in UCAL2 is displayed.
Then, press the Print button to open the input field for the weight negative
tolerance.
Use the Tare, Function and Zero buttons to set a number value for the negative
tolerance, as for the reference weight.
After setting the weight negative tolerance, store with the Print button, position 04
in UCAL2 is displayed.
Press the Zero button, UCAL2 appears on the display.
To save the setting and exit, press and hold the Print button then briefly press the
Zero button. The display returns to weighing mode.
www.soehnle-professional.com
Pos 01 Weight reference value
Pos 02 Weight positive tolerance
Pos 03 Weight negative tolerance
42