Price Calculation; Percentage Weighing; Plus/Minus Weighing; Component Adding - Soehnle Professional Standard Mode D'emploi

3.7 Price calculation

Functionality and operation are as described for "Neutral Measurement".

3.8 Percentage weighing

To program the Function key, "Percentage measurement" must be selected in Setting
mode! For Function key settings, see Paragraph 1.13 or User mode 3710 (see
separate description 470.702.099)
Percentage weighing application
Activate the "Percentage Weighing" function with the Function key.
The display shows PErCEnt for "Percentage weighing". Load the scales to 100%
weight, and confirm with the Print button.
Important: the 100% weight must be at least 100 times the smallest scale division.
The displayed value is 100.0. Stabilisation of the scales is represented on the
display by a triangle at the second position from the top.
If the weight is changed, the percentage value changes accordingly.
Press the ON/Off button to return to weighing mode.

3.9 Plus/minus weighing

Place a test or reference weight on the scales. Set the tare with the Tare button.
Remove the test/reference weight from the scales and place the piece to be
checked. Read off the difference.

3.10 Component adding

After taring the container and placing the first component, the Tare button is
pressed again to reset the scales to zero.
This process can be repeated to add other individual components. Multiple taring is
possible within the total weight range.
Press the Zero button to return to the gross weight display.
www.soehnle-professional.com
UCAL 4 Position 02 = Value 7.
46