Troubleshooting And Assistance - Meister i-drill MAS16ib 2.0 Traduction Du Manuel D'utilisation Original

5450750-Akku-Bohrs_man 11.01.16 09:00 Seite 59
14 – Disposal
CAUTION! Electrical and battery
operated units that no longer
work should not be disposed of in the
house hold waste! They are to be
collected separately, in accordance
with the 2012/19/EU directive for the
disposal of electrical and
electronic waste, and
sent for proper and
environ mentally-friendly
recycling.
Please discard power tools no longer
usable at a local collection point.
Collection and disposal of packaging
materials separately by types
complying with local rules and
regulations. For details, please
contact your municipal authority
concerned.
CAUTION! When it comes to
battery-powered or recharge able
electronic devices, the battery/
rechargeable battery must be
15 – Troubleshooting and assistance
Faults
No functionality.
On/Off switch
cannot be pressed.
Machine does not start up.
Drill does not cut/hardly cuts
into the material to be drilled.
All manuals and user guides at all-guides.com
Potential causes and remedies
– Rechargeable battery charged?
– Rotation direction switch set to centre
- The rotation direction switch
– It is possible that the carbon
– Hammer drilling required?
– Correct drill bit selected?
– Is the machine accidentally set to left
removed and disposed off separately
in accordance with the relevant
regulations. Batteries and
rechargeable batteries should not be
disposed off in the household waster.
Batteries/rechargeable batteries that
can no longer be used should be
disposed of in the containers made
available for that purpose at regional
collection points or at the battery
retailer.
Batteries and rechargeables
may not be disposed of in the
household waste!
As the consumer, you are legally obliged
to return all batteries and rechargeable
batteries whether they contain
hazardous materials* or not, to a
collection point in your community/
town/store so that they can be disposed
of in an environmentally friendly way.
* Labelled with: Cd = Cadmium,
Hg = Mercury, Pb = Lead
position? (Machine cannot be switched on).
is in the centre position
brushes are worn.
Consult a specialist workshop.
rotation?
59