Explanation Of The Symbols On The Equipment - Scheppach HL800VARIO Traduction Des Instructions D'origine

Explanation of the symbols on the equipment

Please read the manual before start-up
Wear safety footwear
Wear work gloves
Use hearing protection and safety goggles
No smoking in the working area
Do not spill hydraulic oil on the floor
Keep your workspace clean! Untidiness can cause accidents!
Dispose of waste oil correctly (waste oil collection point on site). Do not dump waste oil in the ground
or mix it with waste.
Do not remove or modify protection and safety devices.
Only the operator is allowed in the work area of the machine. Keep other people and animals (mini-
mum distance 5 m) at a distance. The machine must only be operated by one person!
Do not remove jammed trunks with your hands.
Caution! Switch off the engine before repair, maintenance and cleaning. Unplug the mains plug.
Danger of bruising and injury from sharp edges; never touch danger areas when the cleaver is mov-
ing.
High-voltage, danger to life!
2x
Oil
Loosen the vent bolt two revolutions, before starting work. Close before transport.
2x
1. 2.
Oil
Caution! Moving machine parts!
Two operating speeds: Low speed and full power, High speed and reduced power
18 | GB
All manuals and user guides at all-guides.com