Disposal And Recycling - Scheppach HL800VARIO Traduction Des Instructions D'origine

The printing of the type designation on the connec-
tion cable is mandatory.
Mains fuse protection is 16 A maximum.
Use a portable safety switch (PRCD) if the residual
current protective circuit (RCD) in the mains power
supply is not provided with a rated residual current of
no more than 0.03 A.
Single phase motor
• The supply voltage must be 220÷240 V/50 Hz.
• The mains connection and extension cable must
have 3 wires = P+N+SL. - (1/N/PE).
• Extension lines up to a length of 25 m must have
a minimum cross section of 1.5 mm², lines with a
length exceeding 25 m must have a minimum cross
section of 2.5 mm².
• The mains connection is protected with a maximum
of 16 A.
Connections and repairs of electrical equipment may
only be carried out by an electrician.
Please provide the following information in the event
of any enquiries:
• Type of current for the motor
• Machine data - type plate
• Engine data - type plate

14. Disposal and recycling

e equipment is supplied in packaging to prevent it
Th
from being damaged in transit. The raw materials in
this packaging can be reused or recycled. The equip-
ment and its accessories are made of various types
of material, such as metal and plastic. Defective
components must be disposed of as special waste.
Ask your dealer or your local council.
Dismounting and disposal
The machine does not include any components
harmful to health or environment. All the materials
can be recycled or decomposed the normal way.
Charge specialized personnel with the disposal that
is familiar with the possible risks and with the present
manual.
When the machine is not used any more and is to be
disposed of, proceed as follows:
• Cut off the electric power supply.
• Remove all electric cables and bring them to a
specialized public collection facility following your
country's regulations.
• Empty the oil tank, fill the oil in a tight bin and bring
it to a specialized public collection facility following
your country's regulations.
• Take all other machine parts to a scrap collection
facility following your country's regulations.
Be sure every machine part is disposed of fol-
lowing your country's regulations.
All manuals and user guides at all-guides.com
Old devices must not be disposed of with house-
hold waste!
This symbol indicates that this product must
not be disposed of together with domestic
waste in compliance with the Directive
(2012/19/EU) pertaining to waste electrical
and electronic equipment (WEEE). This product must
be disposed of at a designated collection point. This
can occur, for example, by handing it in at an author-
ised collecting point for the recycling of waste elec-
trical and electronic equipment. Improper handling
of waste equipment may have negative consequenc-
es for the environment and human health due to po-
tentially hazardous substances that are often con-
tained in electrical and electronic equipment. By
properly disposing of this product, you are also con-
tributing to the effective use of natural resources.
You can obtain information on collection points for
waste equipment from your municipal administration,
public waste disposal authority, an authorised body
for the disposal of waste electrical and electronic
equipment or your waste disposal company.
27 | GB