Panasonic EYFMH1XC Instructions D'utilisation page 86

2.2 USING THE TOOL MANAGER SOFTWARE
2.2.15 SETTING THE DISPLAY OF THE TOOL MANAGER SOFTWARE
Various display settings of software can be made from [Option] of the Tool Manager
software. Select [Option] to open the option dialog.
Basic Settings
• You can select a language, unit of torque and default tab for the software display.
• For languages, English or Japanese can be selected.
• For a unit of torque, Nm, In.lbs, or Ft.lbs can be selected.
• For default tab, [Parameter] or [History] can be selected.
History
• You can show or hide each of the items of history logs.
• Items with (
• The history log data of hidden items will not be deleted.
• When you [Acquire] history logs from the tool, the data of hidden items will also be saved
to the specified folder.
Parameter
• You can show or hide each of the items of configured parameters.
• Items with (
• When you [Apply] configured parameters to the tool, the default values or previously set
values of even the hidden items will be registered to the tool.
EN
) in their checkboxes are displayed on the Tool Manager software.
) in their checkboxes are displayed on the Tool Manager software.
- 86 -