Panasonic EYFMH1XC Instructions D'utilisation page 85

2.2 USING THE TOOL MANAGER SOFTWARE
2.2.14 MANAGING THE DATA FOLDER
You can manage data folders from [File] on the Tool Manager software.
A management of data folders is made by selecting a desired folder from the folder
selection dialog.
Setting Data Folder
• You can specify the folder to which to save the data of history logs and configured
parameters.
• Select a destination folder, from the folder selection dialog. When you select a folder, new
folders will be created under the name of [History] and [Parameter] in the selected folder.
Data Backup
• You can make a backup of history logs and configured parameters.
• Select a folder to which to save the backup, from the folder selection dialog. When you
select a folder, a new backup folder, whose name shows the creation date and time, will
be created in the selected folder.
(Example: Folder name 20210415103045 = Created at 10:30:45 on April 15, 2021)
CAUTION
• Do not change the name of the backup folder. If the folder name is changed, the
backup data cannot be restored.
Data Restore
• The data of history logs and configured parameters saved as a backup can be imported
to the Tool Manager software and restored.
• Select a backup folder from which to restore the backup, from the folder selection dialog.
The data in the backup folder will be imported to the Tool Manager software.
Note
• The same data as the data that is already on the Tool Manager software will not be
overwritten.
EN
- 85 -
Folder selection dialog