Publicité
Les langues disponibles
Les langues disponibles
1.6 CHARGING
How to Charge
Plug the charger into the AC outlet.
1
Note
• Sparks may be produced when the plug is inserted into the AC power supply, but
this is not a problem in terms of safety.
Insert the battery pack firmly into the charger.
2
① Line up the alignment marks and place the battery onto the dock on the charger.
② Slide forward in the direction of the arrow.
During charging, the charging lamp will be lit.
3
When charging is completed, an internal electronic switch will automatically
be triggered to prevent overcharging.
• Charging will not start if the battery pack is warm (for example, immediately after
heavy-duty operation).
The orange standby lamp will be flashing until the battery cools down.
Charging will then begin automatically.
The charge lamp (green) will flash slowly once the battery is
4
approximate ly 80% charged.
When charging is completed, the charging lamp in green color
5
will turn off.
If the temperature of the battery pack is 0 ° C (32 ° F) or less,
6
charging takes longer to fully charge the battery pack than the
standard charging time.
Even when the battery is fully charged, it will have approximately 50% of the power of
a fully charged battery at normal operating temperature.
EN
Alignment marks
- 17 -
Continued to the next page
Publicité
