Panasonic EYFMH1XC Instructions D'utilisation page 72

2.2 USING THE TOOL MANAGER SOFTWARE
2.2.11 INITIALIZING CONFIGURATION OF THE TOOL
You can initialize the tool from the Tool Manager software.
For the initialized tool, all the configured parameters return to factory default settings.
Moreover, the count of accumulated pulsing time of the Maintenance Interval Alarm (Pulse
Time) is reset to 0.
From the tool list (①), select a tool to initialize.
1
The tool to be initialized needs to be being connected with the Tool Manager
software.
Select [Read From Connected Tool] (②) from the parameter list.
2
Select [...] (③) from the configured parameter input screen, and
3
click [Factory Default].
When a parameter file other than that of the tool being connected is selected, not
[Factory Default] but [Delete] is displayed.
● ①
When the dialog is displayed asking whether to initialize the tool,
4
select [OK], and it will be initialized.
EN
② ●
- 72 -
③ ●