Panasonic EYFMH1XC Instructions D'utilisation page 50

2.2 USING THE TOOL MANAGER SOFTWARE
2.2.8 CONFIGURING PARAMETERS OF THE TOOL
Remove the tool from the USB cable once, and do a tightening
4
work on the torque tester or the actual bolt.
Check the torque result shown by the torque tester or the torque
5
wrench which retightened the actual bolt (Audit Torque Value).
EN
Remove the USB cable.
50.0 Nm
- 50 -
50.0 Nm
Continued to the next page