1.3 FUNCTIONAL DESCRIPTION
Tool
Square drive (retainer ring and pin)
Retainer ring
EYFMH1XC / EYFMH1RC
EYFMH2XC / EYFMH2RC
LED light
Refer to 2.1.5
Trigger switch
Refer to 2.1.3
Forward/Reverse lever
Refer to 2.1.3
Control Panel
Refer to Next Page
EN
Sensor block
Note
• The QR code on the lower
part of the sensor block
is our manufacturing
identification mark.
Alignment mark
*USB Type-C is a trademark of USB Implementers Forum.
Square drive (pin-detent type)
EYFMH1XP / EYFMH1RP
EYFMH2XP / EYFMH2RP
Tightening
confirmation
lamp
Refer to 2.1.4
Communication
lamp
Refer to 2.1.4
Vent
Tool hanger mounting hole
USB connector cover
- 12 -
Pin-detent
USB connector
(*USB Type-C™)
Refer to 2.2.5