Burkert 8032 Manuel D'instructions page 9

3 teChNiCal data
General features
Pipe diameter
Medium temperature
Medium pressure
Medium viscosity
Rate of solid particles
Measuring range
Accuracy
Linearity
Repeatability
Measuring element
Protection rating (housing)
electrical features
Installation class
(overvoltage class)
Insulating strength
Power supply
Current consumption
Version with PNP output
Version with relay output
Protection against
polarity reversal
DN06 to DN65; determine the appropriate diameter using the flow rate-velocity-DN
diagrams (see Annex)
depends on the S030 fitting
depends on the S030 fitting
max. 300 cSt
max. 1%
0,3 m/s to 10 m/s, 0.3 m/s corrresponds to a flow rate of 0,5 l/min in a DN06 fitting.
±1 % of the full scale*, with calibration on site or using the teach-in function
± (1 % of the full scale* + 3% of the measured value), with standard K factor
± 0.5 % of the full scale*
0.4% of the measured value
paddle-wheel of the S030 fitting
IP 65, cable plugs being plugged-in and tightened
2
2300 VAC
12-30 VDC
max.750 mA + consumption of the load, if the PNP output is connected
max. 50 mA + consumption of the load, if the PNP output is not connected
max. 80 mA, without load
yes
Flow rate Controller 8032
* full scale = 10 m/s