Burkert 8032 Manuel D'instructions page 6

8032
1.2 Precautions at installation and commissioning
- When the device is powered and the cover is open, protection against
electric shocks is not ensured.
- Always ensure the materials in contact with the medium to measure are
chemically compatible with this medium.
- To clean the device, only use chemically compatible products.
- Protect the device from electromagnetic perturbations, ultraviolet
radiations and, when installed outside, from the effects of climatic
conditions.
when dismounting the controller from the pipe, take all the ne-
cessary precautions linked to the process.
1.3 Conformity to standards
EMC: EN 50 081-1, 50 082-2
Security: EN 61 010-1
Vibration: EN 60068-2-6
Shock: EN 60068-2-27