Publicité
Les langues disponibles
Les langues disponibles
GB-F-NL-16
MAGNA
Construction
Cylinder
Diameter
Width of cut
Number of knives
Height of cut
Fixed
Height of cut adjustment
Fixed head
Rear roll
Bottom block and
blade
block.
Transmission
Recommended lubricants
General:
Gearbox:
Cutting units
Pump drive
Hydraulic Oil:
TRACTOR
Designed to fit Ford 3600, 333 and Massy Ferguson
20D tractors with factory fitted 'Q' cabs. It is also
suitable for other makes depending on the tractor
linkage and PTO mounting.
Recommended tractor tyres:
Pressure:
Recommended wheel
weights and front weights:
GB
Heavy-duty pressed steel
bolted construction
254mm (104in)
762mm (30in)
4, 6
12mm - 85mm
(1/2in - 3 11/32in)
Adjustable screw
system on rear roller.
Full width plain roll 60mm
(2 3/8in) diameter running
on ball bearings with shaft
seals and lubricators.
Replaceable blade,
mounted onto steel
constructed bottom
By hydraulic motor through
gear and pinion to cutting
cylinder.
Multipurpose Lithium based
automotive grease with
good water resisting
properties. Shell Retinax 'A'
or equivalent.
Shell Simnia 'O' grease or
Shell Retinax 'G' grease.
SAE30
To ISO.VG.46.
Shell Tellus 46 or
equivalent.
14.9/13 x 24
(all weather)
0.84Kg/cm
2
(12psi)
Total 138Kg (304lb)
Publicité
