Breville the Scraper Mixer Pro BEM800XL/B Livret D'instructions page 8

BEfoRE fIRSt USE
notE
To remove or insert the mixing bowl,
the mixer head must be raised and
locked into the open position.
AttAChInG thE SCRAPER BEAtER,
fLAt BEAtER, WIRE WhIP oR
DoUGh hooK
1. Ensure the power cord is unplugged
and the Speed Control Dial is in the
OFF position.
2. Press the Tilt-Release button and
simultaneously use the Lift Assist
Handle to raise the mixer head until it
locks into the open position.
3. Locate the groove at the top of
the attachment.
4. Align the groove with the pin on the
Attachment Shaft.
5. Push upwards as far as possible and turn
counter-clockwise until the attachment
securely locks onto the pin.
FIG. 1
6. Press the Tilt-Release button and
simultaneously use the Lift Assist
Handle to lower the mixer head until it
locks into the closed position.
14
REMovInG thE SCRAPER BEAtER,
fLAt BEAtER, WIRE WhIP oR
DoUGh hooK
1. Ensure the power cord is unplugged
and the Speed Control Dial is in the
OFF position.
2. Press the Tilt-Release button and
simultaneously use the Lift Assist
Handle to raise the mixer head until it
locks into the open position.
3. Push the attachment upwards as far as
possible and turn clockwise until the
attachment releases from the pin on the
Attachment Shaft.
4. Pull attachment from Attachment Shaft.
AttAChInG thE PoURInG ShIELD
1. Ensure the power cord is unplugged
and the Speed Control Dial is in the
OFF position.
2. Attach the mixing bowl and either the
scraper beater, flat beater, wire whip or
dough hook.
3. Press the Tilt-Release button and
simultaneously use the Lift Assist
Handle to lower the mixer head until it
locks into the closed position.
4. Slide the main ring into position on
top of the mixing bowl then attach the
pour spout.
BEfoRE fIRSt USE
REMovInG thE PoURInG ShIELD
1. Ensure the power cord is unplugged
and the Speed Control Dial is in the
OFF position.
2. Detach the pour spout then slide the
main ring from the mixing bowl.
3. Press the Tilt-Release button and
simultaneously use the Lift Assist
Handle to raise the mixer head until it
locks into the open position.
4. Remove the attachment from the
Attachment Shaft then remove the mixing
bowl from the Bowl Locking Recess.
15