Safety Warnings And Precautions; Electrical Safety - STAMOS WIG Schweißgeräte Manuel D'utilisation

saFety WarnIngs anD PreCaUtIons

WarnIng: When using tool, basic safety precautions should always be fol-
lowed to reduce the risk of personal injury and damage to equipment.
Read all instructions before using this tool!
WarnIng!
reaD anD UnDerstanD aLL InstrUCtIons
Failure to follow all instructions listed below may result in electric shock,
fire, and/or serious injury.
saVe tHese InstrUCtIons
Work area Precautions
1. Keep your work area clean and well lit. Cluttered benches and dark areas
invite accidents.
2.Do not operate power tools in explosive atmospheres, such as in the pre
sence of flammable liquids, gases, or dust. Power tools create sparks which
may ignite the dust or fumes.
3.Keep bystanders, children, and visitors away while operating a power tool.
Distractions can cause you to lose control. Protect others in the work area
from debris such as chips and sparks. Provide barriers or shields as needed.

electrical safety

1. Grounded tools must be plugged into an outlet properly installed and grounded
in accordance with all codes and ordinances. never remove the grounding prong
or modify the plug in any way. Do not use any adapter plugs. Check with a
qualified electrician if you are in doubt whether the outlet is properly grounded.
If the tool should electrically malfunction or break down, grounding provides a
low resistance path to carry electricity away from the user.
en
38