STAMOS WIG Schweißgeräte Manuel D'utilisation page 40

en
5. Do not overreach. Keep proper footing and balance at all times. Proper footing
and balance enables better control of the power tool in unexpected situations.
6. Use safety equipment. Always wear eye protection. Dust mask, non-skid safety shoes,
hard hat, or hearing protection must be used for appropriate conditions.
tool Use and Care
1. Use clamps (not included) or other practical ways to secure and support
the workpiece to a stable platform. Holding the work piece by hand ro against
your body is unstable and may lead to loss of control.
2. Do not force the tool. Use the correct tool for your application. The correct tool
will do the job better and safer at the rate for which it is designed.
3. Do not use the power tool if the Power switch does not turn it on or off.
Any tool that cannot be controlled with the Power Switch is dangerous and must be
replaced.
4. Disconnect the Power Cord Plug from the power source before making
any adjustments, changing accessories, or storing the tool. Such preventive
safety measures reduce the risk of starting the tool accidentally.
5. store idle tools out of reach of children and other untrained persons. tools
are dangerous in the hands of untrained users.
6. maintain tools with care. Keep cutting tools maintained and clean. Properly
maintained tools are less likely to bind and are easier to control. Do not use a damaged
tool. tag damaged tools "do not use" until repaired
7. Check for misalignment or binding of moving parts, breakage of parts,
and any other condition that may affect the tool's operation. If damaged, have
the tool serviced before using. Many accidents are caused by poorly maintained tools.
8. Use only accessories that are recommended by the manufacturer for
your model. Accessories that may be suitable for one tool may become hazardous
when used on another tool.
40