Specific Safety Rules - STAMOS WIG Schweißgeräte Manuel D'utilisation

service
1. Tool service must be performed only by qualified repair personnel. Service
or maintenance performed by unqualified personnel could result in a risk of injury.
2. When servicing a tool, use only identical replacement parts. Use of
unauthorized parts or failure to follow maintenance instructions may create a risk of
electric shock or injury.

sPeCIFIC saFety rULes

1. maintain labels and nameplates on the tool. These carry important information.
If unreadable or missing, contact our service team for a replacement.
2. always wear the approved safety impact eye goggles and heavy work
gloves when suing the tool. Using personal safety devices reduce the risk for injury.
Safety impact eye goggles and heavy work gloves are available from Harbor Freight
tools.
3. maintain a safe working environment. Keep the work area well lit. Make
sure there is adequate surrounding workspace. Always keep the work area free of
obstructions, grease, oil, trash, and other debris. Do not use a power tool in areas
near flammable chemicals, dusts, and vapors. Do not use this product in a damp or wet
location.
4. avoid unintentional starting. Make sure you are prepared to begin work before
turning on the tool.
5. never leave the tool unattended when it is plugged into an electrical
outlet. Turn off the tool, and unplug it from its electrical outlet before leaving.
6. always unplug the tool from its electrical outlet before performing and
inspection, maintenance, or cleaning procedures.
7. Prevent eye injury and burns. Wearing and using the approved personal safety
clothing and safety devices reduce the risk for injury.
a. Wear the approved safety impact eye goggles with a welding helmet featuring
at least a number 10 shade lens rating.
b. Leather leggings, fire resistant shoes or boots should be worn when using
this product. Do not wear pants with cuffs, shirts with open pockets, or any
clothing that can catch and hold molten metal or sparks.
en
41