Bar And Chain Combinations; Spare Parts And Accessories; Disposal; Ec Declaration Of Conformity - Stihl MSA 120 C Notice D'emploi

English
switched off and the times when it is switched on
but running under no load can be taken into
account in the estimate.
For information on compliance with Employers'
Vibration Directive 2002/44/EC see
www.stihl.com/vib.

21 Bar and Chain Combinations

21.1 STIHL MSA 120 C, MSA 140 C Chainsaws
Pitch Drive link
gauge/groove
width
1/4" P 1.1 mm
The cutting length of a guide bar depends on the chainsaw and the saw chain being used. Actual cut‐
ting length may be less than the specified length
22 Spare Parts and Accesso‐
ries
22.1

Spare parts and accessories

These symbols indicate original STIHL
spare parts and original STIHL acces‐
sories.
STIHL recommends the use of original STIHL
spare parts and accessories.
Despite ongoing market observation, STIHL is
unable to judge the reliability, safety and suitabil‐
ity of other manufacturers' spare parts and
accessories; accordingly, STIHL cannot warrant
for the use of those parts.
Original STIHL spare parts and original STIHL
accessories are available from STIHL dealers.

23 Disposal

23.1 Disposal of Chain Saw, Battery
and Charger
Contact the local authorities or your STIHL
dealer for information on disposal.
Improper disposal can be harmful to health and
pollute the environment.
► Take STIHL products including packaging to a
suitable collection point for recycling in accord‐
ance with local regulations.
► Do not dispose with domestic waste.
62
Length Guide bar
25 cm Rollomatic E Mini
30 cm Rollomatic E Mini
21 Bar and Chain Combinations
20.8 REACH
REACH is an EC regulation and stands for the
Registration, Evaluation, Authorisation and
Restriction of Chemical substances.
For information on compliance with the REACH
regulation see www.stihl.com/reach.
Nose spro‐ Number of
cket teeth drive links
8
24 EC Declaration of Con‐
formity
24.1 STIHL MSA 120 C, MSA 140 C
Chainsaws
ANDREAS STIHL AG & Co. KG
Badstraße 115
D-71336 Waiblingen
Germany
declare under our sole responsibility that
– Category: Cordless chainsaw
– Manufacturer's brand: STIHL
– Model: MSA 120 C, Serial identification: 1254
– Model: MSA 140 C, Serial identification: 1254
conforms to the specifications of Directives
2011/65/EU, 2006/42/EC, 2014/30/EU and
2000/14/EC and has been developed and built in
compliance with the versions of the following
standards valid at the production date:
EN 55014‑1, EN 55014‑2, EN 60745‑1 and
EN 60745‑2‑13.
The EC type examination test was carried out
pursuant to Directive 2006/42/EC, Art. 12.3(b) at:
VDE Prüf- u. Zertifizierungsinstitut (NB 0366),
Merianstraße 28, 63069 Offenbach, Germany
Certification number
– MSA 120 C: 40043471
– MSA 140 C: 40045658
The measured and guaranteed equivalent sound
power level has been determined in accordance
with Directive 2000/14/EC, Annex V.
MSA 120 C
– Measured sound power level: 95 dB(A)
Saw chain
56
71 PM3 (Type
3670)
64
0458-716-9621-E