Télécharger Imprimer la page

Specifications - Stihl MSA 120 C Notice D'emploi

Masquer les pouces Voir aussi pour MSA 120 C:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

20 Specifications

20 Specifications
20.1
STIHL MSA 120 C, MSA 140 C
Chainsaws
MSA 120 C
– Approved battery: STIHL AK
– Weight without battery, guide bar and saw
chain 2.3 kg
– Max. oil tank capacity: 110 cc (0.11 l)
MSA 140 C
– Approved battery: STIHL AK
– Weight without battery, guide bar and saw
chain 2.3 kg
– Max. oil tank capacity: 110 cc (0.11 l)
For battery life see www.stihl.com/battery-life.
20.2
Chain Sprockets and Chain
Speeds
MSA 120 C
The following chain sprockets may be used:
6-tooth for 1/4" P
– Maximum chain speed: 14.0 m/s
MSA 140 C
The following chain sprockets may be used:
6-tooth for 1/4" P
– Maximum chain speed: 14.0 m/s
20.3
Minimum groove depth of guide
bars
The mininum groove depth depends on the pitch
of the guide bar.
– 1/4" P 4 mm
20.4
STIHL AK Battery
– Battery technology: Lithium-ion
– Voltage: 36 V
– Capacity in Ah: see rating label
– Energy content in Wh: see rating label
– Weight in kg: see rating label
– Permissible temperature range for operation
and storage: -10°C to +50°C
20.5
Charger STIHL AL 101
– Rated voltage: see rating plate
– Frequency: see rating plate
– Rated power: see rating plate
– Charging current: see rating plate
– Permissible temperature range for use and
storage: + 5 °C to + 40 °C
The charging times are indicated at
www.stihl.com/charging-times.
0458-716-9621-E
20.6
Extension Cords
If an extension cord is used, the cross sectional
area of its conductors must meet the following
minimum requirements – depending on the line
voltage and length of the extension cord:
If rated voltage on the rating label is 220V to
240V:
– Cord length up to 20 m: AWG 15 / 1.5 mm²
– Cord length 20 m up to 50 m: AWG 13 /
2.5 mm²
If rated voltage on the rating label is 100V to
127V:
– Cord length up to 10 m: AWG 14 / 2.0 mm²
– Cord length 10 m up to 30 m: AWG 12 /
3.5 mm²
20.7
Sound Values and Vibration
Values
The K-value for sound pressure levels is 2 dB(A).
K-value for sound power levels is 2 dB(A). K-
value for vibration level is 2 m/s².
MSA 120 C
STIHL recommends wearing ear defenders.
– Sound pressure level L
to EN 60745‑2‑13: 83 dB(A)
– Sound power level L
EN 60745-2-13: 94 dB(A)
– Vibration level a
measured according to
hv
EN 60745-2-13:
– Control handle: 3.2 m/s²
– Front handle: 3.4 m/s².
MSA 140 C
STIHL recommends wearing ear defenders.
– Sound pressure level L
to EN 60745‑2‑13: 83 dB(A)
– Sound power level L
EN 60745-2-13: 94 dB(A)
– Vibration level a
measured according to
hv
EN 60745-2-13:
– Control handle: 4.8 m/s²
– Front handle: 4.3 m/s².
The vibration levels indicated were measured
according to a standardized test method and can
be used as a basis for comparing electric power
tools. The vibration levels actually occurring may
vary from the values indicated, depending on the
type of application. The vibration levels indicated
can be used for an initial estimate of the vibration
stress. The actual vibration stress has to be esti‐
mated. The times when the electric power tool is
English
measured according
pA
measured according to
wA
measured according
pA
measured according to
wA
61

Publicité

loading

Ce manuel est également adapté pour:

Msa 140 c