Bar And Chain Combinations; Spare Parts And Accessories; Disposal - Stihl MSA 300.0 Notice D'emploi

22 Bar and Chain Combinations

is 2 dB(A). The K-value for vibration level is
2 m/s².
STIHL recommends wearing ear defenders.
– Sound pressure level L
to EN 62841‑4‑1: 93 dB(A)
– Sound power level L
EN 62841-4-1: 104 dB(A)
– Vibration level a measured according to
hv
EN 62841-4-1:
– Control handle: 2.8 m/s²
– Handlebar: 2.6 m/s²
The sound and vibration levels indicated were
measured according to a standardized test
method and can be used as a basis for compar‐
ing electric power tools. The actual sound and
vibration levels may vary from the values indica‐
ted, depending on the type of application. The
22 Bar and Chain Combinations
22.1 STIHL MSA 300.0, MSA 300.0 C Chainsaws
Pitch Drive link
gauge/groove
width
.325" 1.3 mm
The cutting length of a guide bar depends on the chainsaw and the saw chain being used. The actual
cutting length of a guide bar may be less than the specified length.
23 Spare Parts and Accesso‐
ries
23.1

Spare parts and accessories

These symbols indicate original STIHL
spare parts and original STIHL acces‐
sories.
STIHL recommends the use of original STIHL
spare parts and accessories.
Despite ongoing market observation, STIHL is
unable to judge the reliability, safety and suitabil‐
ity of other manufacturers' spare parts and
accessories; accordingly, STIHL cannot warrant
for the use of those parts.
Original STIHL spare parts and original STIHL
accessories are available from STIHL dealers.
0458-009-9601-B
measured according
pA
measured according to
wA
Length Guide bar
35 cm
40 cm
Rollomatic E /
Light 04
45 cm
50 cm
Duromatik E /
40 cm
Strong S
sound and vibration levels indicated can be used
for an initial estimate of the sound and vibration
stress. The actual sound and vibration stress has
to be estimated. The times when the electric
power tool is turned off and the times when it is
turned on but running under no load can be
taken into account in the estimate.
For information on compliance with Employers'
Vibration Directive 2002/44/EC see
www.stihl.com/vib.
21.6 REACH
REACH is an EC regulation and stands for the
Registration, Evaluation, Authorisation and
Restriction of Chemical substances.
For information on compliance with the REACH
regulation see www.stihl.com/reach.
Number of Number of
teeth, spro‐ drive links
cket nose
10
-

24 Disposal

24.1 Disposing of Chainsaw and
Battery
Contact the local authorities or your STIHL
dealer for information on disposal.
Improper disposal can be harmful to health and
pollute the environment.
► Take STIHL products including packaging to a
suitable collection point for recycling in accord‐
ance with local regulations.
► Do not dispose with domestic waste.
English
Saw chain
23 RD3 Pro
60
(Model 3696)
67
23 RM Pro
74
(Model 3693)
81
23 RM3 Pro
(Model 3695)
23 RS Pro
(Model 3690)
67
23 RS3 Pro
(Model 3694)
61