Specifications; Stihl Msa 160 T Chainsaw; Chain Sprockets And Chain Speeds; Minimum Groove Depth Of Guide Bars - Stihl MSA 160 T Notice D'emploi

Masquer les pouces Voir aussi pour MSA 160 T:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 72
English

19 Specifications

19.1 STIHL MSA 160 T Chainsaw

– Approved battery: STIHL AP
– Weight without battery, guide bar and saw chain 1.9 kg
– Max. oil tank capacity: 105 cc (0.105 l)
For battery life see www.stihl.com/battery-life.

19.2 Chain Sprockets and Chain Speeds

The following chain sprockets may be used:
– 10-tooth for 1/4" P
– Maximum chain speed according to ISO 11681:
16.1 m/s

19.3 Minimum groove depth of guide bars

The mininum groove depth depends on the pitch of the guide
bar.
– 1/4" P 4 mm

19.4 STIHL AP battery

– Battery Technology: Lithium-ion
– Voltage: 36 V
– Capacity in Ah: see rating label
– Energy content in Wh: see rating label
– Weight in kg: see rating label
– Permissible temperature range for operation and storage:
-10°C to +50°C

19.5 Noise and Vibration Data

STIHL recommends that you wear hearing protection.
64
– Sound pressure level L
pA
ISO 22868: 81 dB(A) K-value (uncertainty) for noise
pressure level is 2 dB(A).
– Sound power level L
wA
ISO 22868: 93 dB(A) K-value (uncertainty) for sound
power level is 2 dB(A).
– Vibration level a
measured according to EN ISO 22867
hv
– Control handle: < 2.5 m/s². K-value for vibration level is
2 m/s².
– Handlebar: < 2.5 m/s². K-value (uncertainty) for
vibration level is 2 m/s².
The vibration values quoted above have been measured
according to a standardized test procedure and may be used
to compare electric power tools. Depending on the type of
usage, the vibrations that actually occur may differ from the
values quoted. The vibration values quoted may be used for
an initial assessment of the user's exposure to vibrations.
The actual exposure to vibrations has to be estimated. This
process may also take into account times during which the
electric power tool is switched off and times during which it
is switched on but running off load.
Information on compliance with Vibration Directive
2002/44/EC is available at www.stihl.com/vib.

19.6 REACH

REACH is an EC regulation and stands for the Registration,
Evaluation, Authorisation and Restriction of Chemical
substances.
For information on compliance with the REACH regulation
see www.stihl.com/reach.
19 Specifications
measured according to EN
measured according to EN
0458-706-9921-A

Publicité

Table des Matières
loading

Table des Matières