Code
xx-length
Product
y-file size
B ST PULH 6
ProTaper Ultimate™
xx 0SL
Hand Use SLIDER
B ST PULH 6
ProTaper Ultimate™
xx 0SH
Hand Use SHAPER
B ST PULH 6
ProTaper Ultimate™
xx 0 yy
Hand Use FINISHER
B ST PULH 6
ProTaper Ultimate™
xx FXL
Hand Use FINISHER
B ST PULH 5
ProTaper Ultimate™
xx SQE
Hand Use Sequence
B DD PULH
ProTaper Ultimate™
525 SQE
Hand Use Demo Pack
●
Lubricants such as NaOCl, EDTA, ProLube, Glyde™ shall be used.
●
The use of radiographs in combination with an apex locator and a tool for adjusting the
silicon stopper to the correct working length is the appropriate method of working length
determination.
3) WARNINGS
●
Strictly follow this Instruction for Use and the General Processing Instructions For
Endodontic Products (see section 8) to minimize following risks to the device, the patient
and/or the user:
○
Breakage of instrument.
○
Cross-contamination.
○
Heat generation due to insufficient lubrication and irrigation.
○
Swallowing of working part of the instrument.
○
Toxic or allergic reactions caused by processing residues.
4) PRECAUTIONS
●
Safety and effectiveness of use have not been established in pregnant or breastfeeding
women or in children.
END-IFU-PROTAPER-ULTIMATE-MANUAL-REUSABLE-STERILE-V00-WEB-ROW-Multilingual-2021-04
ISO XXX YYYv
XXX-ISO size
Available
lengths
YYY-taper size
v-variable taper
ISO 016.002v
21/25/31 mm
ISO 020.004v
21/25/31 mm
F1: ISO 020.007v
F2: ISO 025.008v
21/25/31 mm
F3: ISO 030.009v
FX: ISO 035.012v
FXL: ISO 050.010v
21/25/31 mm
SLIDER:
ISO 016.002v
SHAPER:
ISO 020.004v
21/25/31 mm
F1: ISO 020.007v
F2: ISO 025.008v
F3: ISO 030.009v
SLIDER:
ISO 016.002v
SHAPER:
ISO 020.004v
25 mm
F1: ISO 020.007v
F2: ISO 025.008v
F3: ISO 030.009v
Packaging and content
Blister with 6 instruments (sterile)
Blister with 6 instruments (sterile)
Blister with 6 instruments (sterile)
Blister with 6 instruments (sterile)
Blister with 1 instrument of each
instrument (sterile)
Blister with 1 instrument of each
instrument (sterile)
3/140