Télécharger Imprimer la page

GRAUPNER KWIK FLY MK 3 Mode D'emploi page 32

Publicité

Care and maintenance
• Clean the model carefully after every flight, and remove any dirt from the
propeller. Clean the aeroplane and the RC components using suitable cleaning
agents only. Ask your model shop for information if you are not sure.
• If the model is not to be operated for a considerable time, it is important to clean
and re-lubricate all the moving parts.
Notes on completing the model
• Before building the model it is important that you study the plan and read the
instructions right through to the end, referring to the Parts List all the time. In
general terms the instructions and the Parts List reflect the sequence of
assembly.
• Tools can be dangerous; please be aware of the hazards involved in using them.
• Use cable of adequate cross-section, capable of carrying the currents which will
flow when the model is flying.
• Deploy the receiver aerial as far away as possible from high-current cables - at
least 3 cm.
• Before making any glued joints, be sure to clean the surfaces and remove all
traces of grease. We recommend sanding lightly, or wiping with a non-greasy
cleaning agent. The same applies to surfaces to be painted, otherwise the paint is
unlikely to adhere well. Before gluing parts to the fuselage it is essential to
roughen the surfaces with fine abrasive paper and de-grease them with acetone
or similar solvent, otherwise you will not obtain strong, durable joints. This applies
in particular to moulded GRP fuselages.
Additional items required
Motor and accessories
Motor
Order No.
OS MAX 46 AX
2701
OS MAX 46 Fxi
2702
OS MAX 50 SX
1933
OS MAX 55 AX
2715
OS MAX FS 52
SURPASS
four-stroke motor
1874
Radio control system
For this model you require at least a five-channel RC system with six servos.
GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY
Änderungen vorbehalten! Keine Haftung für Druckfehler
Capacity
Silencer
cc
Order No.
2701.33
7.45
7.45
2701.33
8.12
1809.33 or
1871.72
9.0
2715.33
8.56
1874.33 or
1411.33
Propeller
Order No.
28 x15 cm
1316.28.15
28 x15 cm
1316.28.15
32 x15 cm
1316.32.15
33 x18 cm
1318.33.18
30 x15 cm
1316.30.15
32
Glowplug
Order No.
1682
1682
1682
1682
1680
02/2007

Publicité

loading

Ce manuel est également adapté pour:

9393