MINN KOTA ULTERRA Instructions D'installation page 17

2
c. When installing with a Solix, the Built-In MEGA Side
Imaging cable can be plugged directly into the Solix
fish finder. Plug the Built-in MEGA Side Imaging
cable into the corresponding connection on the
Solix fish finder.
d. When installing with a Helix, first attach the Adapter
Cable and then plug the Adapter Cable into the
Helix fish finder. The Adapter Cable will only have
one connection that is keyed on the back of the
Helix fish finder. Plug the Adapter Cable into the
only matching keyed connection on the Helix
fish finder.
NOTICE:
Check for compatibility or any required
adapter cables online at minnkotamotors.com.
The cable from the trolling motor can be extended
with a 10' Extension Cable #720081-1
humminbird.com.
NOTICE:
If any cables need to be routed, please
follow the guidelines in the Routing Connection
Cables section of these installation instructions.
NOTICE:
The connectors are keyed to prevent
reversed installation.
Built-In MEGA Down Imaging
Built-In MEGA Down Imaging delivers nearly 3X the output of standard Side Imaging
for the very first time. The Minn Kota flagship families of trolling motors, including Ultrex, Ulterra, Terrova, and Fortrex, now include
Built-In MEGA Down Imaging sonar, the clearest imaging available only from Humminbird. With Humminbird MEGA imaging sonar built
right into the trolling motor, you now have a crystal clear view of what's directly beneath the boat, without having to manage all of the
cables that come with external transducers. The Built-In MEGA DI transducer is only available on new models equipped from the factory
and cannot be added to an existing trolling motor.
©2019 Johnson Outdoors Marine Electronics, Inc.
FEATURE OVERVIEW AND CONNECTING THE CABLES
Humminbird Solix Fish Finder
Humminbird Helix Fish Finder
found at
Keyed Adapter Cable
Imaging from Trolling
for Helix Fish Finder
Fourteen Pin Connector
Locking Collar
Built-In MEGA Side Imaging from
Trolling Motor
Fourteen Pin Connector
Adapter Cable
(Helix ONLY)
Locking Collar
Built-In MEGA Side
Motor
NOTICE:
The MKR-MI-1 (1852088) is used on Helix 8,
9, 10 and 12 models.
, and takes fishfinding into the megahertz frequency
®
Solix Fish Finder
Connection
Plug directly into
Solix Fish Finder
Adapter
Cable Keyed
Connection
Plug into
Helix Fish
Finder
minnkotamotors.com | 17