EBARA SP FC 1,5T-2 Instructions Pour L'installation Et La Maintenance page 42

Key for selecting operation of electropump three in:
- AUTO: yellow led LL5A lit: the electropump is started by the control board.
- MAN: yellow led LL5A lit: the electropump is started by holding down the key for more than 5
LL5A
SB3A
When the key is released, the electropump stops and the led LL5A goes out.
Press the key
again (the led LL5A lights up).
Key for selecting electropump one in:
LL6A
- STOP: yellow led LL6A lit: all electropump operation is excluded.
SB4
- RESET: yellow led LL6A blinking: holding down the key for more
than 5 seconds starts the reset process of the alarms that
intervened in electropump one.
Key for selecting electropump two in:
LL7A
- STOP: yellow led LL7A lit: all electropump operation is excluded.
SB5
- RESET: yellow led LL7A blinking: holding down the key for more
than 5 seconds starts the reset process of the alarms that
intervened in electropump two.
Key for selecting electropump three in:
- STOP: yellow led LL8A lit: all electropump operation is excluded.
LL8A
- RESET: yellow led LL8A blinking: holding down the key for more
SB5A
than 5 seconds starts the reset process of the alarms that
intervened in electropump three.
Key with double functions:
- To return to the HOME PAGE MONITOR.
1
SB6
- To see the page up, the group of under parameters of the HOME PAGE MENU '.
Key with double functions:
- To return to the HOME PAGE MONITOR.
1
SB7
- To see the page down, the group of under parameters of the HOME PAGE MENU '.
Key with double functions:
- Select, on the Home Page MENU ', the list down, of the groups of parameters.
2
SB8
- Decrement the data of the parameter to edit.
- Decreases the index of the history alarm.
Button to confirm the data changed.
SB9
Key with double functions:
- Select, on the Home Page MENU ', the list up, of the groups of parameters.
2
SB10
- Increment the data of the parameter to edit.
- Increases the index of the history alarm.
KL1
Display screen of the control board.
KL2
Board for mimic panel keypad.
Relay and amperometric control board for protection against overload of the
motors:
KL3
- TRM1 = regulation of the current limit of motor M1, in PRESSURE SWITCH operation.
- Yellow led for indicating motor operation beyond the limit set in TRM1.
- RESET button for the amperometric block of motor M1.
- TRM2= regulation of the current limit of motor M2, in PRESSURE SWITCH operation.
- Yellow led for indicating motor operation beyond the limit set in TRM2.
- RESET button for the amperometric block of motor M2.
- TRM3= regulation of the current limit of motor M3, in PRESSURE SWITCH operation.
- Yellow led for indicating motor operation beyond the limit set in TRM3
- RESET button for the amperometric block of motor M3.
KL4
Terminal board for connection of the remote controls.
Frequency converter to control, protect, and to modulate from 25 to 50 Hz, rotational speed of the
GF1
electric pump. Every restarted of the group, the inverter is switched on all the electric pumps.
seconds.
and select automatic starting of the electropump
ENGLISH
42