Connection; Description; Temperature Setting - Eurocave Wine Bar 8.0 Mode D'emploi

1I. Connection
Have your plug checked (presence of fuses, amps and
30 mA circuit breaker) by a qualified electrician.
III. Description
A
- P button: allows access to compartment temperature settings and to control unit setting.
B
- U button: allows you to power up the appliance and place it on standby
C/D
- allows you to change the temperature values of each compartment.
E
- cold function indicator (if on= the left-hand compartment is chilling the wine)
F
- cold function indicator (if on= the right-hand compartment is chilling the wine)
G
- warm function indicator (if on= the right-hand compartment is warming the wine)
IV. Temperature setting
The Wine Bar 8.0 appliance allows you to bring wine to the correct serving temperature and protect open bottles from oxidation.
1
Press the key. the message
can now set the temperature of the left-hand compartment.
2
To change this setting, press the
or the key to lower it. The
range is 6°C - 15°C / 43°F - 59°F.
3
Once you have obtained the desired value, confirm it
by pressing the key. The message
appear. You can now set the temperature of the right-hand
compartment.
Stand-by Alarm
1
"SP1"
will appear. You
key to increase it
"SP1"

temperature setting

''SP2''
will then
G B
E F A
2
3
OK
2
4
To change the value, press the
the key to lower it.
''SP2''
The temperature setting range is 9°C - 18°C / 48°F
- 64°F.
5
Confirm by pressing the
and return to the normal display.
C
D
4
5
OK
4
key to increase it or
key to save the changes
-21-