Bill Of Material; Spare Parts; Recommended Spare Parts - salmson NEX Manuel D'installation Et Mise En Service

ENGLISH
12.1.2 BILL OF MATERIAL
Item
1100
1220
1340
2100
2200
2510
2540
3011
3013
3134
3200 Bearing bracket housing
3240
3712.1
3712.2
3853.1 Grease nipple (grease lubrication only)
3853.2 Grease nipple (grease lubrication only)
3855
3856
4200
4305
4330
4590.1
4590.2
4610.1
4610.2
6544
6569.1
6569.2
6569.3
6570.1
6570.2
6570.3
6570.4
6572.1
6572.2
6580.1
6580.2
6700.1
9035
12.2 SPARE PARTS
During warranty period the use of genuine pump parts is
mandatory. It is highly recommended to do so even after warranty
period ends.
Description
Casing
Casing cover
Adaptor flange
Shaft
Impeller
Spacer bush
Thrower
Ball bearing
Thrust ball bearing
Foot
Beraing carrier
Ball bearing nut
Ball bearing nut
Constant oiler level
Oil sight gauge
Mechanical seal
Shaft seal ring
Labyrinth ring
Casing seal
O'Ring
O'Ring
O'Ring
Circlips
Filling plug
Plug
Magnetic plug
Screw
Screw
Screw
Screw
Stud bolt
Stud bolt
Nut
Nut
Key
Guard
Your request for spare parts can be sent to your local Salmson
distributor or to our Spare Parts Department through our Salmson
Hotline.
In case of inquiry, please indicate :
 Serial number,
 Complete pump description,
 Item or description of the requested spare part(s).
The serial number of the pump is engraved on the pump nameplate.
12.3 RECOMMENDED SPARE PARTS
When the pump runs on the selected duty point, maintenance
operations are very limited. To reduce risk of unexpected maintenance
operations it is recommended to create and follow a maintenance plan.
In any case, following spare parts should be kept on stock to ensure a
quick re‐start :
 Mechanical seal or a set of packing rings,*
 Set of bearing bracket ball bearings*,
 Set of shaft bearing*,
 Set of motor ball bearings (for frame size > 90),
 Complete set of seals and gaskets,
 Coupling elastic part(s)*,
 Automatic greasing cartridge*.
(*) : some parts may not concern your pump. Our Spare Parts Dpt will
confirm pump bill of material according to the serial number engraved
on pump nameplate.
12.4 RECOMMENDED SPARE PARTS FOR 2
YEARS OPERATION
Spare parts list can be erected using the recommended list
available in the DIN24296.
For example, recommended spare parts and quantities for one or two
pumps installed (to be adapted according the pump design) :
‐
Impeller : 1 (or 1 set),
‐
Shaft : 1,
‐
Impeller nut : 1,
‐
Shaft seal : 2,
‐
Bearing bracket ballbearing : 1 of each type,
‐
Bearing* : 1 of each type,
‐
Casing/stage seal : 4 complete sets,
‐
Mechanical seal : 1,
‐
Packing ring* : 2 sets,
‐
Automatic greasing cartridge* : 2.
(*) : some parts may not concern your pump. Our Spare Parts Dpt will
confirm pump bill of material according to the serial number engraved
on pump nameplate.
26